highspeed AUTOMATIC EDGEBANDER
UEB 990 PUR
- SPECIFICATION
Basic Function of a Machine
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
PRODUCT IMAGES
HIGHLIGHTS
Liquid Sprayer
- Spraying anti adhesive liquid on panel will restrict the glue on top and bottom surface of panel.
- Equipped with PLC controlled pneumatic flow.
Premilling Unit
- An automatic length sensor switch is installed, which allows accurate determination of panel length and processing of the entire panel.
- Equipped with a 1.5 KW spindle motor-powered, 12000 RPM diamond cutter head.
- There is a partition and an air blower installed between the Premilling Unit and the Glue Unit.
Heating Lamp
- This function is used to remove moisture from the edge of thw panel.
- Help to get perfect bonding during edge banding
Glue unit
- Apply the hot melt glue on the panel, pneumatic cutting of PVC edge banding as per the length of the panel, gluing on the entire surface of the panel height.
- These features are specially designed to ensure a consistently precise finish and superior quality and to avoid any poor quality and inconsistency of glue.
Pressure rollel group
- A pressure roller group consists of 4 pressure rollers. The first pressure roller diameter is 150 mm and the remaining pressure roller diameters are 100 mm.
- It offers incredible results with a smooth finish and a long-lasting edge attached to the panel.
- On the glue table, all pressure roller are mounted 1 degree tilted to each other side . This ensures that the glue is evenly and firmly distributed in the centre of the panel. It also prevents access overflow of glue on the panel surface.
Heating Lamp
- This function is used to remove moisture from the edge of thw panel.
- Help to get perfect bonding during edge banding
Pre-melting glue unit
- Glue is always there in liquid form in the upper pot.
- It will pour the glue as per requirement.
- Cable sensor helps to maintain glue level in bottom pot.
Pressure rollel group
- A pressure roller group consists of 4 pressure rollers. The first pressure roller diameter is 150 mm and the remaining pressure roller diameters are 100 mm.
- It offers incredible results with a smooth finish and a long-lasting edge attached to the panel.
Double rail end cutting unit
- Unit used to cut excess PVC from both ends of the panel. Equipped with high-frequency motors with a power of 0.55 kW and 12,000 rpm and saw blades with a diameter of 150 mm.
- High reliability and precision as installed large linear guides. 2 saw blades diam. 104 x 3.0 x 22 mm, T = 30.
Rough top/bottom trimming
- Perform Initial trimming of the top and bottom edges of the glued edge.
- Comes with 2 high end frequency motors with suction hood and front and vertical Guide Plate
- All spindles equipped with encoder readouts for fast adjustment
Fine top/bottom trimming
- Performs fine trimming of the top and bottom edges of the pvc edge.
- Comes with 2 highend frequency motors with suction hood and vertical Guide Plate.
- Motors manually tiltable between 2 working positions: Flat and radius trimming.
Corner Rounding
- corner rounding unit for front and rear edges for perfect corner trimming.
- This unit works in different profile in prosessed post forming machine like half nose, full nose, and duck nose.
- Workpiece length min – 150 mm, edgebanding thickness upto 0.4 mm to 3mm.
PVC Scrapping Unit
- PVC Scrapping to remove excess pvc from top and bottom edge.
- It provides better edge, consistency, precision and smoothness..
- Includes 2 R-profile blades with suction hood and front and vertical guide plate.
Glue Scraper
- The glue scraper helps remove excess adhesive from the joint surface of the panel and edgeband.
- This process ensures that there is no glue on the panel or outside the application area.
- Work as a soft scrapper which gives fine finishing.
Grooving Unit
- The built-in grooving function in the machine gives easy work for making a groove on the board.
- This function is PLC controlled, so it’s very easy to operate.
Liquid Sprayer
- Spraying anti-adhesive liquid on the panel before buffing the unit gives the clean finished surface.
- Equipped with PLC controlled pneumatic flow.
- Workpiece length min – 150 mm, edgebanding thickness up to 0.4 mm to 3 mm.
Buffing unit
- Edge banding machine buff wheels are used to polish and buff the edges of the top/bottom wood panels to create a smooth and glossy finish.
- Finishing the edge looks dimensional and attractive with this process.
